
4 Q90 Series Pilot Burner Assembly Kit Installation Instructions
Technical Specifications
Product
Q90 Series Pilot Burner Assembly Kit
Spark Electrode Rod 446 Stainless
Mounting Bracket Plated Steel
Flame Sensor Kanthal D or Hoskins 815
Pilot Tip 430 Stainless
Pilot Body Plated Steel
Inlet Tip Aluminum
Inlet Body Brass
Ceramic Steatite
Material
Ignition Cable 18 AWG, UL Wire Style 3257
Spark Electrode Rod
1500°F (816°C)
Mounting Bracket
825°F (441°C)
Sensor
1800°F (982°C)
Pilot Tip
1500°F (816°C)
Pilot Body
825°F (441°C)
Inlet Tip
635°F (335°C)
Inlet Body
750°F (399°C)
Ceramic
1000°F (538°C)
Maximum Temperature
Ratings
Ignition Cable
482°F (250°C)
Standard High Temperature
Gauge 18 AWG 18 AWG
Maximum Temperature Rating
302°F (150°C) 482°F (250°C)
Flame Sensor Lead
UL Wire Style Style 3212 Style 3252
Agency Listings
Pilot Burner CSA Certificate Number 229521-1656071
Specifications Standards
ANSI Z21.20
CAN1-6.4
CAN/CSA-C22.2 No. 199-M89
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is performed
under dry and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and may void
the warranty. Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The original
equipment manufacturer or end user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC for
questionable applications. BASO Gas Products LLC shall not be liable for damages or product malfunctions resulting from misapplication or
misuse of its products.
Refer to the J Series Pilot Burners/Y90 Series Inlet Fitting Product Bulletin (BASO-PB-PILOTS/Y90) for necessary information on operating
and performance specifications for this product.
1007 South 12th Street
PO Box 170
Watertown, WI 53094 www.baso.com
1-877-227-6427 (1-877-BASOGAS) Printed in U.S.A
Kommentare zu diesen Handbüchern